Peugeot 505 · 1979-1992

Peugeot 505 Battery Replacement in Dubai

We match the battery to your Peugeot 505 by model year, bring it to where the car is stopped and fit it on the spot, after testing the old one.

Up to 24 months warranty
Free delivery and fitting
Open 24/7, every day

Send your location Call +971 50 166 8304

Pay your way

Card
Cash

What to know

The Peugeot 505 and its 12V battery

On older Peugeot 505 model years the fault is sometimes a corroded terminal, a tired earth strap or a weak alternator, not the battery itself, which is why the charging system is tested before we recommend a replacement.

Peugeot models with Stop and Start (most recent 208, 2008, 3008, 5008 and 508) are built with EFB or AGM batteries, depending on engine and equipment. The 301 and older cars without Stop and Start use a conventional flooded battery. The type is printed on the battery label, and the replacement should match it or go one step up, never down.

The battery is under the bonnet on the models common in the UAE, with a quick-release positive clamp and, on Stop and Start cars, a charge status sensor on the negative terminal. Peugeot asks for the ignition to be off for a few minutes before disconnecting so the control units go to sleep, and for a short wait after reconnecting before the first start. Windows and sunroof may need their one-touch function reset. No dealer coding is normally needed for a like-for-like battery.

All Peugeot models

Peugeot battery facts that apply to the 505

Model years: Discontinued, built 1979-1992
Battery location: Under the bonnet, left side on most models, beneath a plastic cover
Technology: EFB or AGM on Stop and Start models; flooded on the 301 and older cars
Registration: No coding for a like-for-like swap; correct disconnect and reconnect waiting times matter

Pick your year

Which year is your Peugeot 505?

Tap your model year to open WhatsApp with the car details filled in. Add your location pin and send.

Before we come

What to send for a Peugeot 505 battery

Your location pin, the road and which direction you were heading
The model year of your Peugeot 505 (it is on the registration card)
A photo of the label on the battery fitted now, if you can reach it
What the car is doing: slow crank, clicking, nothing at all, or a warning light
Parking level and bay number if the car is in a basement

How it works

From your location pin to a car that starts

Four steps, and you know what is happening at each one. Nothing is fitted until the battery has been tested.

1
Share where the car is
Send a location pin with the road name, direction of travel and the nearest exit or landmark. In a basement, add the level and bay.
2
Confirm the car details
Make, model and year, plus a photo of the battery label if you can. That is how the right battery gets loaded.
3
Get an arrival estimate
We check access and technician availability, then tell you when to expect us before anyone sets off.
4
Test, then jump or replace
The technician tests the battery, explains the reading and carries out a jump start or a replacement. The car is started before he leaves.

Battery brands

Battery brands that suit the Peugeot 505

The logo matters less than the match. We stock these brands in flooded, EFB and AGM so the battery suits the car, then back it with up to 24 months warranty.

Compare all battery brands

More Peugeot models

Batteries for other Peugeot models

Questions

Peugeot 505 battery questions

Short answers to what drivers ask before and during a battery call-out.

Read all questions and answers

Which battery fits a Peugeot 505?

It depends on the model year and engine. EFB or AGM on Stop and Start models; flooded on the 301 and older cars. Send the year and a photo of the current battery label, and we match the size, terminal layout and technology before dispatch.

Where is the battery on a Peugeot 505?

For Peugeot in general: Under the bonnet, left side on most models, beneath a plastic cover. The exact position on your Peugeot 505 can vary by generation, and the technician confirms it from the model year before starting.

Does a Peugeot 505 need battery registration after a change?

For Peugeot: No coding for a like-for-like swap; correct disconnect and reconnect waiting times matter. If your Peugeot 505 needs it, the technician brings the tool and does it on site after fitting.

Can you jump-start a Peugeot 505 instead of replacing the battery?

Often, yes. If the battery is only discharged and tests healthy afterwards, a jump start is enough. If the test shows it can no longer hold charge, we explain the reading and can replace it on the spot.

Peugeot 505 battery replacement by area

Arrange roadside battery assistance

Send your location pin, your car details and a short description of the problem. We confirm whether we can reach you and what the car needs.

Location pin and road
Make, model and year
What the car is doing

Send your location Call +971 50 166 8304Open 24/7 · Up to 24 months warranty