Audi Q2 · 2016-2026

Audi Q2 Battery Replacement in Dubai

We match the battery to your Audi Q2 by model year, bring it to where the car is stopped and fit it on the spot, after testing the old one.

Up to 24 months warranty
Free delivery and fitting
Open 24/7, every day

Send your location Call +971 50 166 8304

Pay your way

Card
Cash

What to know

The Audi Q2 and its 12V battery

Later Audi Q2 model years may have start-stop or a battery sensor that controls charging. Where they do, the replacement has to be the same type (EFB or AGM) and may need registering to the car.

Most Audis from the last fifteen years or so use an AGM battery, because of start-stop, energy recuperation and the heavy electrical load. Some smaller engines were supplied with EFB. Recent A6, A7, A8, Q7 and Q8 versions are 48V mild hybrids: they keep a 12V battery that we can replace and add a 48V lithium unit that is workshop work. e-tron models have a 12V auxiliary battery in addition to the high-voltage pack.

Location depends on the model. The A3, Q2 and Q3 mostly have the battery in the engine bay. The A4, A5, A6, A7, A8 and Q5 generally carry it in the boot under the floor, and the first-generation Q7 has it under a front seat. Cars with a remote battery have jump-start posts under the bonnet. After fitting, the new battery is adapted with a diagnostic tool (capacity, technology, manufacturer and serial) so the energy management starts from a known state.

All Audi models

Audi battery facts that apply to the Q2

Model years: Current model, built 2016-2026
Battery location: Engine bay on A3, Q2, Q3. Boot floor on most larger models. Under a front seat on early Q7
Technology: AGM on most cars, EFB on some smaller engines, plus 48V lithium on mild hybrids
Registration: Yes. Battery adaptation with a diagnostic tool after fitting

Pick your year

Which year is your Audi Q2?

Tap your model year to open WhatsApp with the car details filled in. Add your location pin and send.

Before we come

What to send for a Audi Q2 battery

Your location pin, the road and which direction you were heading
The model year of your Audi Q2 (it is on the registration card)
A photo of the label on the battery fitted now, if you can reach it
What the car is doing: slow crank, clicking, nothing at all, or a warning light
Parking level and bay number if the car is in a basement

How it works

From your location pin to a car that starts

Four steps, and you know what is happening at each one. Nothing is fitted until the battery has been tested.

1
Share where the car is
Send a location pin with the road name, direction of travel and the nearest exit or landmark. In a basement, add the level and bay.
2
Confirm the car details
Make, model and year, plus a photo of the battery label if you can. That is how the right battery gets loaded.
3
Get an arrival estimate
We check access and technician availability, then tell you when to expect us before anyone sets off.
4
Test, then jump or replace
The technician tests the battery, explains the reading and carries out a jump start or a replacement. The car is started before he leaves.

Battery brands

Battery brands that suit the Audi Q2

The logo matters less than the match. We stock these brands in flooded, EFB and AGM so the battery suits the car, then back it with up to 24 months warranty.

Compare all battery brands

More Audi models

Batteries for other Audi models

Questions

Audi Q2 battery questions

Short answers to what drivers ask before and during a battery call-out.

Read all questions and answers

Which battery fits a Audi Q2?

It depends on the model year and engine. AGM on most cars, EFB on some smaller engines, plus 48V lithium on mild hybrids. Send the year and a photo of the current battery label, and we match the size, terminal layout and technology before dispatch.

Where is the battery on a Audi Q2?

For Audi in general: Engine bay on A3, Q2, Q3. Boot floor on most larger models. Under a front seat on early Q7. The exact position on your Audi Q2 can vary by generation, and the technician confirms it from the model year before starting.

Does a Audi Q2 need battery registration after a change?

For Audi: Yes. Battery adaptation with a diagnostic tool after fitting. If your Audi Q2 needs it, the technician brings the tool and does it on site after fitting.

Can you jump-start a Audi Q2 instead of replacing the battery?

Often, yes. If the battery is only discharged and tests healthy afterwards, a jump start is enough. If the test shows it can no longer hold charge, we explain the reading and can replace it on the spot.

Audi Q2 battery replacement by area

Arrange roadside battery assistance

Send your location pin, your car details and a short description of the problem. We confirm whether we can reach you and what the car needs.

Location pin and road
Make, model and year
What the car is doing

Send your location Call +971 50 166 8304Open 24/7 · Up to 24 months warranty